|
|
 |
TMP-1 Cooling Thermostat - $77.95
The TMP-1 allows you to control the temperature within your growing environment.
Just connect your cooling equipment, then set the temperature that you wish to
maintain. If the temperature exceeds your setting, the outlet on the front is
activated. Comes with a 3' remote sensor. The TMP-1 is rated for 15 amps @ 120
volts. |
 |
AIR-3
Temperature/Humidity/CO2 Controller - $199.95
The AIR-3 expands our line of atmospheric controllers by providing the ability
to coordinate supplemental CO2 with your ventilation equipment. The AIR-3's
operation is similar to the AIR-1, with the addition of a photo cell and CO2
outlets. The photo cell ensures that your CO2 device (CO2 valve or generator)
only activates when your lights are on. To conserve CO2, the CO2 outlets are
automatically disabled while your ventilation equipment is running. The AIR-3 is
rated for 10 amps @ 120 volts. |
 |
PPM-2A - "The Fuzzy™"- $689.95
People who need the absolute best CO2 controller available today, use
the PPM-2a from C.A.P. What sets the PPM-2a apart from the competition?
Fuzzy Logic(tm)... Fuzzy Logic(tm) can be compared to a good driver. As
a good driver approaches a red light, he or she applies the brakes to
gradually slow down BEFORE getting to the intersection. Fuzzy Logic(tm)
uses the same idea to bring the CO2 level up to the desired setting
without over-shooting the desired CO2 level. The PPM-2a automatically
"dials-in" the exact parameters for your area. It learns how your grow
area uses CO2 and adapts to keep the CO2 levels constant. The PPM-2a can
be connected to a temperature or environmental controller, disabling the
CO2 function while your exhaust fans are running to reduce CO2 waste.
The PPM-2a is capable of being used to control both compressed CO2 and
gas-burning CO2 generators. When used with a CO2 generator, the user can
change the PPM-2a mode to ON / OFF control which eliminates the rapid
cycling of the CO2 generator. The PPM-2a will control any make of CO2
valve or generator that is 120 volts.
|
 |
PPM-3
CO2 Monitor/Controller- $499.95
The PPM-3 from C.A.P. is the most affordable and simple CO2 controller
available. Its' proven technology is very accurate at measuring levels of Carbon
Dioxide in your growing area from 0 to 5000 ppm (Parts-Per-Million). Using the
PPM-3 is quite simple. Just plug your CO2 device (CO2 valve or generator) into
the "piggyback" cord and it will automatically maintain the CO2 level that you
specify. The PPM-3 works with any make of CO2 valve or generator that is 120
volt. |
 |
C.A.P. PPM-1c CO2 Monitor - $439.95
The PPM-1c is an extremely accurate CO2 sensor. It measures the exact
level of CO2 in your growing area and displays this value from 0 to 5000
Parts-Per-Million (PPM) on its' digital readout. Even though the PPM-1c
can be used as a simple way to measure your CO2 level, the true
potential of the PPM-1c is not realized until it is connected to one of
the controllers C.A.P. has designed to work with it. When the PPM-1c is
connected to either the CO2-2, CO2-4 or CGC-1 it commands the
controllers to release or produce more CO2 only when required. The
timers built into the atmosphere controllers continue to coordinate with
the PPM-1c to give you the precision control not possible with other
manufacturers CO2 control systems using only ON/OFF control. You enter
the exact level of CO2 you want to maintain (usually 1500 PPM) and
you're done. |
 |
C.A.P. MLC-4 & 4a - $179.95 and up
The MLC-4 and MLC-4a Master Lighting Controllers are the best devices
for controlling up to four HID lights from one time-clock or controller.
You run 30 amp, 240 volt power into the MLC-4, and all of the outlets
are controlled by one 120 volt "trigger cable". You can plug the
"trigger cable" into a standard 24 hour timer or lighting controller.
The MLC-4 features four standard 240 volt style (NEMA 6-15) outlets,
which your ballasts are plugged into. The MLC-4a uses 120 volt style (NEMA
5-15) outlets which allows for running your ballasts at 240 volts
without having to change out your ballast power cords. An integrated
timer option is available which replaces the "trigger cable", allowing
you to control your MLC with the built-in time clock. The MLC-4's are
rated for 30 amps @ 240 volts.
|
 |
C.A.P. MLC-8 & 8a - $269.95 and up
The MLC-8 and MLC-8a Master Lighting Controllers are the best devices
for controlling up to eight HID lights from one time-clock or
controller. You run 40 amp, 240 volt power into the MLC-8, and all of
the outlets are controlled by one 120 volt "trigger cable". You can plug
the "trigger cable" into a standard 24 hour timer or lighting
controller. The MLC-8 features eight standard 240 volt style (NEMA 6-15)
outlets, which your ballasts are plugged into. The MLC-8a uses 120 volt
style (NEMA 5-15) outlets which allows for running your ballasts at 240
volts without having to change out your ballast power cords. An
integrated timer option is available which replaces the "trigger cable",
allowing you to control your MLC with a built-in time clock. The MLC-8's
are rated for 40 amps @ 240 volts.
|
C.A.P. CO2 Generators
GEN-1: $324.95
GEN-2: $529.95
Additional Burners: $29.95
LXO-1: $74.95 |
Carbon Dioxide (CO2) is one of the easiest ways to accelerate plant growth.
Plants grown with supplemental CO2 can produce up to 40% more flowers or fruit.
A propane or natural gas CO2 generator is the most cost effective way to add CO2
to your environment. Many greenhouses use CO2 generators to boost CO2 levels
safely and economically. C.A.P. has developed some of the safest and most
reliable CO2 Generators. They are capable of producing between 3 and 26 cubic
feet of CO2 per hour. C.A.P. manufactures 2 models, The GEN-1 and the GEN-2. The
GEN-1 is recommended for small to medium size areas up to 15’ x 15’. The GEN-2
is recommended for larger areas up to 30’ x 30.Both the GEN-1 and the GEN-2
units feature a "two-stage" safety pilot valve, which will not allow fuel to
flow to the burner unless the pilot is lit. They both come with a standard
"tip-over" switch will shut down the fuel to the main burner in the event the
unit falls or tips over.
The C.A.P. CO2 generators are constructed of powder coated steel enclosures that
resist moisture, rust and discoloration. They will provide years of trouble-free
operation. The GEN-1 and GEN-2 are manufactured in the USA using only AGA and/or
UL listed components that are appropriate for use with both propane and natural
gas. The units come complete with a low-pressure, in-line Natural gas regulator
or the new Type1 style "no-tool-required" propane regulator that makes tank
replacement easy. C.A.P. CO2 generators operate up to 100 degrees cooler than
other competitive products. The GEN-1 and GEN-2 can also be easily converted
from propane to natural gas or vise-versa in less than 10 minutes with an
inexpensive kit available from Sunlight Supply. Both the GEN-1 and GEN-2 CO2
generators are expandable! This allows you to increase the unit`s capacity to
produce CO2 simply by installing additional burners. Each burner increases the
CO2 generating capacity by approximately 3 cubic feet per hour.
The GEN-1 is capable of producing between 3 and 13 cubic feet of CO2 per hour.
It comes standard with one burner, producing approximately 3 cubic feet per
hour. You can add up to 3 additional burners, increasing the unit is capacity to
up approximately 13 cubic feet of CO2 per hour. GEN-2:
The GEN-2 is capable of producing between 16 and 26 cubic feet of CO2 per hour.
It comes standard with 5 burners, producing approximately 16 cubic feet of CO2
per hour. You can add up to 3 additional burners, increasing the unit’s capacity
to up to approximately 26 cubic feet of CO2 per hour.
- A Propane Crossover (LXO-1) is available which will allow you to connect 2
propane tanks to your generator and run off of either or both tanks. |
 |
REG-1
CO2 Regulator - $149.95
The C.A.P. CO2 Regulator/Emitter will allow you to maintain ideal CO2 levels for
optimum growth. It features an accurate, easy to adjust CO2 flow meter, a
pre-set regulator that never needs adjusting, and a solenoid valve. Each unit
also comes with the tubing needed to disperse the CO2 evenly throughout your
room by attaching the tubing to the back of an oscillating fan for even
dispersion. The flow rate is adjustable from .5 - 15 Cubic Feet Per Hour . |
 |
REG-2
Dual CO2 Tank Regulator - $239.95
The C.A.P. Dual CO2 Tank Regulator/Emitter will allow you to maintain ideal CO2
levels for optimum growth. It features an accurate, easy to adjust CO2 flow
meter, a pre-set regulator that never needs adjusting, and a solenoid valve.
Each unit also comes with the tubing needed to disperse the CO2 evenly
throughout your room by attaching the tubing to the back of an oscillating fan
for even dispersion. The flow rate is adjustable from .5 - 15 Cubic Feet Per
Hour. It is made to run 2 tanks at the same time, doubling the time between
refills! |
|
